Chiller service

to DC Kryokühler, Polycold®, Telemark

Service on cryocoolers

In addition to a comprehensive service portfolio for our own DC cryocooler, we are the first independent company in Europe to offer service and refrigerant gas for cryogenic generators of the Polycold® and Telemark brands.

Coolant gas

Our refrigerant blend was the first for cryogenic generators that is completely free of HCFCs and was specially developed for our DC cryocooler as well as Polycold® and Telemark systems.

Our refrigerant is a patented, non-toxic and non-flammable refrigerant gas with a significantly lower global warming potential (GWP) than OEM refrigerants.

Our refrigerant gas provides better performance with lower compressor discharge pressures and temperatures.

Telemark Brooks Polycold® Druschke DC Kryokühler
TVP/Sx 3500 PFC-662HC DC 2
TVP/Sx 2000 PFC-661HC DC 4
TVP/Sx 1000 FC-661-ST  
  PFC-660HC  
  PFC-660-ST  
  PFC-552HC  
  PFC-551HC  
  PFC-551-ST  
  PFC-550HC  
  PFC-550-ST  
  PFC-1102  
  FC-1101/2000  
  PFC-1101-ST  
  PFC-1100HC  
  P-1000  
  XC-8800 HC  
  XC-8800 MT  

Top Up Service

We offer a specially tailored top-up service for Polycold® and Telemark cryogenerators. By using our universal refrigerant, cryogenerators from all manufacturers can be refilled to restore their original performance.

Leakage control on cryogenerators

Since 2014, cryogenerators containing 5-50 tons of CO₂e refrigerant must undergo an annual leakage check. All Polycold® PFC, Telemark TVP systems must therefore be checked regularly by a qualified company that is qualified in accordance with the requirements of (EU) N 517/2014.

Druschke GmbH has specially trained refrigeration technicians and is a “certified company according to §6 of the ChemKlimaschutzV”.  If small leaks are detected on cryogenerators, they can be repaired on site. Leaks in compressors or leaks in the insulated upper area of the cryogenerators can be repaired by Druschke GmbH's in-house service.


Remanufacturing & Upgrade von Polycold®- und Telemark-Sytems

Polycold® and Telemark systems are essential for all thin film coating, metallurgy and vacuum heat treatment processes.

Druschke GmbH offers remanufacturing or upgrade of the Polycold® systems PFC00 and 01 series. The system upgrade also improves the performance and reliability of the Polycold® systems PFC 02.

Remanufacturing of all Polycold® and Telemark systems take place in accordance with (EU) N 517/2014 F_GAS regulations.

(POLYCOLD is a registered trademark of Edwards Vacuum LLC and Druschke is not an authorized distributor or affiliated or related to Edwards Vacuum LLC)

Download further information on refrigerants